Specifications

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide
1725-86914-000_C.docx
September 2013 56
12. Configure IP to Trunk Routing
Configure IP to Trunk Routing is used to set up routing from IP telephony to PRI. All calls that
would not be routed internally to another SIP registration will be routed to the PBX.
1 Select the Configuration tab and navigate to VOIP > GW and IP to IP > Routing > IP to
Trunk Group Routing.
2 Set the following parameters
Dest Host Prefix
*
Source Host Prefix
*
Dest IP Phone
Prefix
*
Source Phone Prefix
*
Source IP Address
*
Trunk Group ID
1
IP Profile ID
0
Source IP Group ID
-1
3 Click Submit.