Specifications

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide
1725-86914-000_C.docx
September 2013 45
Set CDR Reporting
CDR (Call Data Record) information is helpful when interpreting syslog traces. Here again, we
set the option for the most robust reporting.
1 Select the Configuration tab and navigate to VOIP > SIP Definitions > Advanced
Parameters.
2 Scroll down to the CDR and Debug section.
3 Optionally you may set the CDR Server IP Address. If not set it will log to the syslog
server IP address set in the previous step.
4 Set CDR Report Level to Start & End & Connect Call.
5 Click Submit.