Specifications

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide
1725-86914-000_C.docx
September 2013 31
○ Bottom-row slots: ensure that the module is orientated such that the port number labels
are located at the top of the module's front panel. This module orientation is considered
as facing down.
4 Push the module into the slot and press on it firmly to ensure it has been fully inserted.
5 Using a flathead screwdriver, tighten the module's mounting pins.
Connect to Power
Connect to Computer
Warning: Do not connect the Mediant Gateway to the network
Do not connect the Mediant Gateway to your corporate network before configuring it.
Connect the Mediant Gateway to the power supply:
• On the device's rear panel, connect the left (active) 100-240V~50-60 Hz power socket to a
standard electrical outlet using the supplied AC power cord.
Connect the Mediant Gateway to the PC to be used for initial configuration:
• Use your own network cable to connect the PC (or laptop) network port to a LAN port on
the CRMX module.