Specifications

1725-86914-000_C.docx
September 2013 122
Appendix A: Module Maintenance
The T1 module can be removed or added while the GW is operational but will not be activated
until the Mediant Gateway is rebooted.
On the home screen, select the module by pointing to the slot title “Digital” and double click. A
popup “Remove Module” will appear. Click and follow the instructions.
Caution
If you only have one T1 card, you will get an error message as removing the card will
make the Mediant Gateway inoperable and calls will be terminated/not allowed. If you
need redundancy, you will need two T1 cards.
Once the removal is done, the slot title will display Digital Reserved.
To insert the new module, double click the slot title and insert the new module. The module will
be recognized. You may have to reboot the Mediant Gateway in order for the module to
activate.