Specifications

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide

1725-86914-000_C.docx

September 2013 105

1 Use the command change public-unknown-numbering.

2 Set/change the following fields:

Ext Length

Ext. Code

Enter the originating extension number range. In this case all CCMS

phones were administered in the 3xxx range

Trk Grp

Total CPN Length

Note: Specify Trunk Group

We could specify both trunk Group 2 and 3 on the same line since we want the same

behavior on both, but for example purposes, this one is built on a separate line.

Adding a Second PRI to an Existing Trunk Group on the

PBX

Another method of expansion is to add another trunk to the existing Mediant Gateway by either

having a 2-port T1 module or adding a second T1 module. The PBX does not recognize the

difference but the Mediant Gateway will need to be configured differently for each scenario.