Specifications

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide
1725-86914-000_C.docx
September 2013 104
7. Add the Route Pattern
Note: What are the existing route patterns?
If some route patterns already exist in the system you would use the command
change route pattern x.
1 Enter the command add route-pattern x, where x is the number of the unique route
pattern you created in step 7 (the test used 2).
2 Set these parameters:
Name
Enter a meaningful name. The test used AC_Mediant Gateway
Group Number
Enter the Trunk Group Number created in Step 3 (the test used #3)
FRL
Choose a facility restriction level that will not compromise your sites'
security practices
Numbering Format
pub-unk
3 Press Esc-E to submit.
8. Set Caller ID
We also need to ensure we are sending the correct caller id. You can choose to send a full 10
digit caller ID, or send just the four digit caller id. For this example, we are sending the 4 digit
caller id only.