Specifications

Spectralink 84-Series with AudioCodes Gateway and Avaya Communication Manager: Interoperability Guide
1725-86914-000_C.docx
September 2013 103
6. Change the Automatic Alternate Routing Table
Next we want to change the Automatic Alternate Routing table to tell the system that anytime
someone dials 71xx, we want to send that call out the PRI to the second AudioCodes Mediant
Gateway. You may need to add many entries to this table and the dialplan analysis table in
order to accommodate your extensions.
1 Enter the command change aar analysis.
2 Add these parameters:
Dialed String
Enter as much of the unique pattern as you can easily define This example
is assuming that all extensions on the first gateway will be of the form 70xx,
and all extensions on the second gateway will be of the form 71xx.
Total Min and Max
Enter the total number of digits in the extensions' length)
Route Pattern
Enter a unique number which will be used to create the route pattern in the
next step. If you are unsure, cancel the current command and use the
command list route pattern. Then define the next available number.
Call Type
aar