User`s manual

AudioCodes Mediant 800 MSBG Installation and Configuration Guide Page 46 of 47

35. Select VoIP > SBC > Routing SBC > IP to IP Routing Table

36. Enter a 9 in the box next to Add

37. Enter the following Settings:

Source IP Group ID: 1

Destination Username Prefix: WANPhoneXXX

i. A strict naming convention will have to adopted for all

phones that are going to be on the WAN so that this

naming mask will be effective.

ii. This naming mask will handle any phone named

WANPHONE(001-999) as X is wild card for a single digit 0-

Destination IP Group: 12

38. Click Apply