User`s manual

AudioCodes Mediant 800 MSBG Installation and Configuration Guide Page 3 of 47
Initial Setup – LAN Settings:
1. Connect a Laptop/Desktop with its NIC configured for DHCP to the
Mediant 800 via a crossover cable or a switch
2. Open a browser and navigate to 192.168.0.1 entering the default
username and password
a. User: Admin
b. Pass: Admin
3. After logging in, always make sure the radio button next to Full is
selected. Without this radio button selected you do not have access to
all the possible configuration options
4. Select System > Application Settings
5. Enter the appropriate information for your network