User`s manual

AudioCodes Mediant 800 MSBG Installation and Configuration Guide Page 20 of 47
25. Select VoIP > Coders and Profiles > IP Profile Settings
26. Here you can configure various settings to handle variations on the
default SIP parameters. You then assign these Profiles to their
respective IP Groups to override the default SIP Parameters.
These profiles can be used to handle:
a. Differences in DSCP from one network to another
b. If one network uses SRTP and another uses RTP if Media
Security is Enabled
c. If one network uses T.38 Relay and another does not allow faxing
d. If you set up Coder Groups you can assign them to the IP Profile
and then assign the IP Profile to the proper IP Groups.
e. Etc.
27. Once your configurations are complete, press Submit and, if
necessary, assign them to the proper IP Groups.