User`s manual

AudioCodes Mediant 800 MSBG Installation and Configuration Guide Page 2 of 47
4. Install
Download the Mediant 800 files form the 3
rd
Party Validation Website:
http://testlab.inin.com
Contained in the zip file will be the validated version of firmware (.cmp), as
well as any supplemental configuration files.
5. Configuration
Methods :
• Manipulation of the supplied .ini file(s), then uploading it via the Web
interface.
o This method is not supported for the Mediant 800. The Mediant
800 requires two separate INI files that are interdependent and
modifying the DATA.INI file manually is not supported by
AudioCodes. As a result, no INI files have been provided with this
document.
• Web Interface
o This method is the preferred method for all configuration needs.
o Please note: Caution should be exercised and the AudioCodes
documentation should always be referenced when using the Web
interface configuration option.
• TFTP
o This method of configuring the Mediant 800 has not been tested.
Contents
Initial Setup – LAN Settings: ..................................................................................................................... 3
Initial Setup – VoIP Settings: .................................................................................................................... 9
Initial Setup – SBC Routing: ................................................................................................................... 23
Advanced Installation – TLS: .................................................................................................................. 26
Advanced Installation – External User Agents: ................................................................................... 36