User`s manual

AudioCodes Mediant 800 MSBG Installation and Configuration Guide Page 17 of 47
a. LAN:
Proxy Set ID: 1
Proxy Address
Enter the IP of the Primary IC Server in the first line
and, if applicable, the IP of the Backup IC Server in
the second line. Choose the appropriate Transport
Type for each.
Note: While not strictly necessary, it is
recommended to put the appropriate SIP
communications port on end of the IC Servers’ IP
Addresses.
Enable Proxy Keep Alive: Using Options
Proxy Keep Alive Time: 60
Proxy Load Balancing Method: Disable
Is Proxy Hot Swap: Yes
Proxy Redundancy Mode: Homing
SRD Index: 1
Classification Input: IP Only