User`s manual

AudioCodes Mediant 800 MSBG Page 8 of 66
Installation and Configuration Guide
Initial Setup - Network Settings
17. Select LAN switch VLAN 1
18. If you do not wish to use the Mediant 800’s DHCP server then
change the highlighted (see below) drop down to Disabled
and click OK. Otherwise, modify the settings to fit your
network design.
19. Navigate to VoIP > Network > IP Settings
20. Click the radio button next to Index 0
21. Click the Edit button that appears above the IP settings table
22. Enter the information necessary to fit your network design.
Also ensure that the WAN Interface Name has the proper