User`s manual
AudioCodes Mediant 800 MSBG Page 4 of 66
Installation and Configuration Guide
Initial Setup - Network Settings
Initial Setup
Network Settings
1. Connect a Laptop/Desktop with its NIC configured for DHCP
to the Mediant 800 via a crossover cable or a switch
2. Open a browser and navigate to 192.168.0.1 entering the
default username and password
a. User: Admin
b. Pass: Admin
3. After logging in, always make sure the radio button next to
Full is selected. Without this radio button selected you do not
have access to all the possible configuration options
4.
Navigate to
System > Application Settings