User`s manual

AudioCodes Mediant 800 MSBG Page 39 of 66
Installation and Configuration Guide
Initial Setup - FXO/FXS Configuration
15. Navigate to VoIP > GW and IP to IP > Hunt Group Settings
16. Enter a Hunt Group ID configured in step 14 in the Hunt Group ID
field.
17. Choose the Channel Select Mode:
NOTE: For an FXS this should be By Dest Phone Number.
18. For an FXS, configure Registration Mode as Per Endpoint if the
station needs to register with IC. *See diagram step 16.
19. For an FXS, configure Servicing IP Group ID to be the IP Group of
the IC Server(s). *See diagram step 16.
20. To route calls to the FXS, enter records to match the Destination
Phone number.
21. Click Submit