User`s manual

AudioCodes Mediant 800 MSBG Page 27 of 66
Installation and Configuration Guide
Initial Setup - TDM Configuration
TDM Configuration
Now that the SRDs & IP Groups have been configured we can
move on to configuring the TDM Settings. For more details see the GW
and IP to IP section of the Mediant 800 MSBG SP User’s Manual.
1. Navigate to VoIP > PSTN > Trunk Settings
2. Choose the appropriate Protocol Type. NI2 will be used for this
example.
3. Choose the appropriate Clock Master, ISDN Termination
Side, and any other settings necessary to match your Carrier