User`s manual

AudioCodes Mediant 800 MSBG Page 2 of 66
Installation and Configuration Guide
Initial Setup - Network Settings
4. Install
Download the Mediant 800 files form the 3
rd
Party Validation
Website:
http://testlab.inin.com
Contained in the zip file will be the validated version of firmware
(.cmp), as well as any supplemental configuration files.
5. Configuration
Methods
:
Manipulation of the supplied .ini file(s), then uploading it via the
Web interface.
o This method is not supported for the Mediant 800. The
Mediant 800 requires two separate INI files that are
interdependent and modifying the DATA.INI file manually is
not supported by AudioCodes. As a result, no INI files have
been provided with this document.
o Backing up of the configuration by downloading the INIs
and restoring them if the device fails is still supported.
Web Interface
o This method is the preferred method for all configuration
needs.
o Please note: Caution should be exercised and the
AudioCodes documentation should always be referenced
when using the Web interface configuration option.
TFTP
o This method of configuring the Mediant 800 has not been
tested.