User`s manual

SIP User's Manual 80 Document #: LTRT-83303
Mediant 1000 & Mediant 600
3.4.2 Media Settings
The Media Settings menu allows you to configure the device's channel parameters. These
parameters are applied to all the device's channels. This menu contains the following page
items:
 Voice Settings (refer to ''Configuring the Voice Settings'' on page 81)
 Fax/Modem/CID Settings (refer to ''Configuring the Fax / Modem / CID Settings'' on
page 84)
 RTP/RTCP Settings (refer to ''Configuring the RTP / RTCP Settings'' on page 88)
 General Media Settings (refer to ''Configuring the General Media Settings'' on page
93)
 Hook-Flash Settings (refer to "Configuring the Hook-Flash Settings" on page 94)
Notes:
• Channel parameters can be modified on-the-fly. Changes take effect
from the next call.
• Some channel parameters can be configured per endpoint or call routing,
using profiles (refer to ''Configuring the Profile Definitions'' on page 212).
• The parameter 'Fax Transport Mode' (Fax / Modem / CID Settings
screen) is overridden by the parameter IsFaxUsed.