User`s manual

Version 5.4 67 May 2008
SIP User's Manual 3. Web-Based Management
Parameter Description
Control Network Settings (Available only in Multiple IP and Dual IP modes.)
IP Address
[LocalControlIPAddress]
The device's source IP address in the Control network.
The default value is 0.0.0.0.
Subnet Mask
[LocalControlSubnetMask]
The device's subnet mask in the Control network.
The default subnet mask is 0.0.0.0.
Default Gateway Address
[LocalControlDefaultGW]
N/A. Use the IP Routing table instead (refer to ''Configuring the IP
Routing Table'' on page 75).
Media Network Settings (Available only in Multiple IP and Dual IP modes.)
IP Address
[LocalMediaIPAddress]
The device's source IP address in the Media network.
The default value is 0.0.0.0.
Subnet Mask
[LocalMediaSubnetMask]
The device's subnet mask in the Media network.
The default subnet mask is 0.0.0.0.
Default Gateway Address
[LocalMediaDefaultGW]
The device's default Gateway IP address in the Media network.
The default value is 0.0.0.0.
Multiple Interface Settings
Multiple Interface Table
Click the right-pointing arrow
button to open the 'Multiple Interface
Table' page. For a description of configuring multiple IP interfaces, refer
to ''Configuring the Multiple Interface Table'' on page 68.
VLAN (For detailed information on the device's VLAN implementation, refer to ''VLANS and Multiple
IPs'' on page 450.)
VLAN Mode
[VlANMode]
Enables the VLAN functionality.
 [0] Disable (default).
 [1] Enable.
 [2] PassThrough = N/A.
Note: This parameter cannot be changed on-the-fly and requires a
device reset.
VALN ID Settings
Native VLAN ID
[VLANNativeVlanID]
Defines the native VLAN identifier (Port VLAN ID - PVID).
The valid range is 1 to 4094. The default value is 1.
OAM VLAN ID
[VLANOamVlanID]
Defines the OAMP VLAN identifier.
The valid range is 1 to 4094. The default value is 1.
Control VLAN ID
[VLANControlVlanID]
Defines the Control VLAN identifier.
The valid range is 1 to 4094. The default value is 2.
Media VLAN ID
[VLANMediaVlanID]
Defines the Media VLAN identifier.
The valid range is 1 to 4094. The default value is 3.
NAT Settings
NAT IP Address
[StaticNatIP]
Global (public) IP address of the device to enable static Network
Address Translation (NAT) between the device and the Internet.