User`s manual

SIP User's Manual 64 Document #: LTRT-83303
Mediant 1000 & Mediant 600
3.4 Configuration Tab
The Configuration tab on the Navigation bar displays all menus related to device
configuration. These menus appear in the Navigation tree and include the following:
 Network Settings (refer to ''Network Settings'' on page 64)
 Media Settings (refer to ''Media Settings'' on page 80)
 PSTN Settings (refer to PSTN Settings on page 96)
 Security Settings (refer to ''Security Settings'' on page 111)
 Protocol Configuration (refer to ''Protocol Configuration'' on page 133)
 Advanced Applications (refer to ''Advanced Applications'' on page 244)
 TDM Configuration (refer to ''Configuring the TDM Bus Settings'' on page 251)
¾ To access the menus of the Configuration tab, take this step:
 On the Navigation bar, click the Configuration tab; the Navigation tree displays the
configuration menus pertaining to the Configuration tab.
3.4.1 Network Settings
The Network Settings menu allows you to configure various networking parameters. This
menu contains the following page items:
 IP Settings (refer to ''Configuring the IP Settings'' on page 64)
 Application Settings (refer to ''Configuring the Application Settings'' on page 71)
 IP Routing Table (refer to ''Configuring the IP Routing Table'' on page 75)
 QoS Settings (refer to ''Configuring the QoS Settings'' on page 78)
3.4.1.1 Configuring the IP Settings
The 'IP Settings' page is used for configuring basic IP networking parameters such as the
device's IP address. However, from this page you can also access the 'Multiple Interface
Table' page for configuring multiple interfaces.
Note: Once you configure multiple interfaces in the 'Multiple Interface Table' page
(accessed by clicking the button), when clicking the IP Settings page
item in the Navigation tree, the 'Multiple Interface Table' page is accessed
(instead of the 'IP Settings' page).