User`s manual

SIP User's Manual 552 Document #: LTRT-83303
Mediant 1000 & Mediant 600
14.5.6 Stage 5: Installing the Boot Media
Now you have the boot media which enables SUSE installation of the Mediant 1000 using
serial connection (terminal) with RS232 cable.
¾ To complete the installation, take these 8 steps:
1. Connect your Windows™ PC to the Mediant 1000 using a serial cable.
2. Open the Terminal application on your Windows™ PC. (Refer to the Additional
Requirement in ''Additional Requirement for Linux¢ SUSE Installation'' on page 544).
Create a new connection with the following:
• Connect Port = COM1
• Baudrate = 115200 (or bits per second)
• Data Bits = 8
• Parity = None
• Stop Bits = 1
• Flow Control = None
• Terminal settings = 132x47, ANSI Color (optional)
Note: If you are using Tera Term, navigate to the “Setup” option in the main menu
and use the following configuration.
• Serial port:
>> Baud rate: 115200
• Terminal Setup:
>> Terminal size: 132x47
>> Term size = win size
>> Terminal ID: VT100
• Window:
>> Scroll buffer: 47
• Font:
>> Font: Terminal
>> Size: 8 (the default size is 10. If the window “slides” beyond your
display then set the size to 8).
3. Connect the USB CD-ROM device via USB cable to the Mediant 1000.
4. Insert the “Boot CD” into the USB CD-ROM.
5. Power up the Mediant 1000.