User`s manual

Version 5.4 541 May 2008
SIP User's Manual 14. Installing Linux™ Operating System on the OSN Server
11. Navigate to the 'Partner Install' folder, select the isolinux.cfg file, and then click Open.
Figure 14-21: ISO Open Function
The updated isolinux.cfg file is copied to the 'Partner Install\isolinux' directory.
12. Save the boot.iso file in the 'Partner Install' folder.
14.4.4 Stage 4: Burning ISO Image to CD
¾ To burn the boot.iso file to CD, take these 3 steps:
1. Open a burning utility.
2. Use the Burn Image option to burn the boot.iso file to an empty CD media.
3. Label the media as the “Boot CD”.
Note: Ensure that the boot.iso file is burned as an image and not as a data file.
14.4.5 Stage 5: Installing the Boot Media
Now you have the boot media which enables the installation of the Mediant 1000 using the
serial connection (terminal) with RS-232 cable.
¾ To complete the installation, take these 7 steps:
1. Connect your Windows™ PC to the Mediant 1000 using a serial cable.
2. Connect the USB CD-ROM device to the Mediant 1000 using a USB cable.
3. Power up the PC.
4. Open the Terminal application (e.g. HyperTerminal) on your Windows™ PC. Create a
new connection with the following settings:
• Connect Port: COM1
• Baudrate: 115200 (bits per second)
• Data Bits: 8
• Parity: None