User`s manual

SIP User's Manual 532 Document #: LTRT-83303
Mediant 1000 & Mediant 600
13. Navigate to the 'Partner Install' folder, select the isolinux.cfg file, and then click Open.
Figure 14-11: ISO Open Function
The updated isolinux.cfg file has now been copied from the 'Partner Install' folder to
the boot.iso image.
14. Save the boot.iso image in the 'Partner Install' folder.
14.3.3 Stage 3: Burning ISO Image File to CD-ROM
¾ To burn the boot.iso file to a CD-ROM, take these 3 steps:
1. Open a burning utility.
2. Use the Burn Image option to burn the boot.iso file to an empty CD media.
3. Label the media as “Boot CD”.
Note: Ensure that the boot.iso file is burned to the CD as an image and not as a
data file.
14.3.4 Stage 4: Installing the Boot Media
Now you have the boot media which enables the installation of the Mediant 1000 using the
serial connection (terminal) with RS-232 cable.
Note: Some third-party applications require specific Linux OS installation steps.
Once you have completed the basic installation procedure explained in this
section, refer to the relevant third-party application user's manual for a
detailed explanation on installing the Linux OS per third-party application.
¾ To complete the installation, take these 9 steps:
1. Connect your Windows™ PC to the Mediant 1000 using a serial cable.
2. Connect the USB CD-ROM device to the Mediant 1000 using a USB cable.
3. Power up the PC.