User`s manual

Version 5.4 525 May 2008

SIP User's Manual 14. Installing Linux™ Operating System on the OSN Server

3. Connect the external CD-ROM to the power supply.

4. Connect the Mediant 1000 to the power supply.

14.3 Installing Linux™ RedHat (and Fedora)

Perform the following four stages for installing Linux

Redhat (and Fedora). (Some

distributions of Linux

may vary slightly):

Notes:

• Some distributions of Linux may vary slightly.

• The Linux version for installation must be according to the application

requirements (e.g., Asterisk requires RHAT ES Ver. 3.0; Pingtel ECS

requires RHAT ES Ver. 4.0).

14.3.1 Stage 1: Obtaining the Linux Redhat ISO Image

To obtain an updated ISO image, perform one of the following:

 Download it from the AudioCodes Web site, as described in ''Downloading an updated

LinuxTM Redhat ISO Image'' on page 525,

 Create it using the steps detailed in ''Creating an updated Linux Redhat ISO Image''

on page 526.

14.3.1.1 Downloading an Updated ISO Image

¾ To download an ISO image from AudioCodes' Web site, take these

6 steps:

1. Access AudioCodes' Web site (http://www.audiocodes.com), and then navigate to the

'Support' page.

2. Click the Registered Users Login link, and then login with your username and

password.

3. Under 'Product Documentation', select the Mediant 1000 link, and then click Mediant

1000 OSN Server.

4. Select Linux Boot Image, and then select the required installation.

5. Download the ISO image to a folder called 'Partner Install' on your PC.

6. Continue with Stage 3 to burn the CD (''Stage 3: Burn the CD'' on page 532).