User`s manual

Version 5.4 47 May 2008
SIP User's Manual 3. Web-Based Management
3. Click the Delete Scenario File button; a message box appears requesting
confirmation for deletion.
Figure 3-20: Message Box for Confirming Scenario Deletion
4. Click OK; the Scenario is deleted and the Scenario mode closes.
Note: You can also delete a Scenario using the following alternative methods:
• Loading an empty dat file (refer to ''Loading a Scenario to the Device'' on
page 46).
• Loading an ini file with the ScenarioFileName parameter set to no value
(i.e., ScenarioFileName = "").
3.3.5.7 Exiting Scenario Mode
When you want to close the Scenario mode after using it for device configuration, follow
the procedure below:
¾ To close the Scenario mode, take these 2 steps:
1. Simply click any tab (besides the Scenarios tab) on the Navigation bar, or click the
Cancel Scenarios button located at the bottom of the Navigation tree; a message box
appears, requesting you to confirm exiting Scenario mode, as shown below.
Figure 3-21: Confirmation Message Box for Exiting Scenario Mode
2. Click OK to exit.