User`s manual

Version 5.4 395 May 2008
SIP User's Manual 6. Auxiliary Configuration Files
6.7 User Information File
The User Information file is a text file that maps PBX extensions, connected to the device,
to global IP numbers. In this context, a global IP phone number (alphanumerical) serves as
a routing identifier for calls in the 'IP World'. The PBX extension uses this mapping to
emulate the behavior of an IP phone.
Note: The mapping mechanism is disabled by default and must be activated using
the parameter EnableUserInfoUsage (refer to ''Advanced Parameters'' on
page 166).
Each line in the file represents a mapping rule of a single PBX extension. Up to 1,00 rules
can be configured. Each line includes five items separated with commas. The items are
described in the table below:
Table 6-1: User Information Items
Item Description Maximum Size
(Characters)
PBX extension #
The relevant PBX extension number. 10
Global phone #
The relevant global phone number. 20
Display name
A string that represents the PBX extensions for the Caller ID. 30
Username
A string that represents the user name for SIP registration. 40
Password
A string that represents the password for SIP registration. 20
An example of a User Information file is shown in the figure below:
Figure 6-1: Example of a User Information File
Note: The last line in the User Information file must end with a carriage return (i.e.,
by pressing the <Enter> key).
The User Information file can be loaded to the device using the ini file (UserInfoFileName
parameter described in ''Auxiliary / Configuration Files Parameters'' on page 383), the Web
interface (refer to ''Loading Auxiliary Files'' on page 266), or by using the automatic update
mechanism (UserInfoFileURL, refer to the Product Reference Manual).