User`s manual

Version 5.4 383 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
RTCPXREscIP
For a description of this parameter, refer to "Configuring the RTP /
RTCP Settings" on page 88.
RTCPXRReportMode
For a description of this parameter, refer to "Configuring the RTP /
RTCP Settings" on page 88.
4.4.15 Auxiliary / Configuration Files Parameters
The configuration files (i.e., auxiliary files) can be loaded to the device using the Web
interface or a TFTP session (refer to ''Auxiliary Files'' on page 266). Before you load them
to the device, you need to specify these files in the ini file and whether they must be stored
in the non-volatile memory. The table below lists the ini file parameters associated with
these auxiliary files:
Table 4-15: Auxiliary / Configuration Files Parameters
ini File Parameter Description
CallProgressTonesFilename
The name of the file containing the Call Progress Tones
definitions. Refer to the Product Reference Manual for additional
information on how to create and load this file.
FXSLoopCharacteristicsFileName
The name (and path) of the file providing the FXS line
characteristic parameters.
Note: This parameter is applicable only to Mediant 1000.
FXOLoopCharacteristicsFileName
The name (and path) of the file providing the FXO line
characteristic parameters.
Note: This parameter is applicable only to Mediant 1000.
CASFileName
This is the name of the file containing specific CAS protocol
definition (such as 'E_M_WinkTable.dat'). These files are
provided to support various types of CAS signaling.
CASFileName_x
CAS file name (e.g., 'E_M_WinkTable.dat') that defines the CAS
protocol. It is possible to define up to eight different CAS files by
repeating this parameter. Each CAS file can be associated with
one or more of the device trunks using the parameter
CASTableIndex_x.
CASTablesNum
Number 1 to 8. Specifies how many CAS configuration files are
loaded.
VoicePromptsFileName
The name (and path) of the file containing the Voice Prompts
definitions. Refer to the Product Reference Manual for additional
information on how to create and load this file.
PrerecordedTonesFileName
The name (and path) of the file containing the Prerecorded
Tones.
CasTrunkDialPlanName
The Dial Plan name (up to 11-character strings) that is used on
the specific trunk.
DialPlanFileName
The name (and path) of the file containing dial-plan
configuration for CAS and SIP protocols. This file should be
constructed using the TrunkPack Conversion Utility (refer to the
Product Reference Manual) supplied as part of the software
package on the CD accompanying the device.