User`s manual

SIP User's Manual 38 Document #: LTRT-83303
Mediant 1000 & Mediant 600
¾ To delete an existing index table entry, take these 3 steps:
1. In the 'Index' column, select the index corresponding to the table row that you want to
delete.
2. Click Delete; the table row is removed from the table.
3.3.4 Searching for Configuration Parameters
The Web interface provides a search engine that allows you to search any ini file
parameter that is configurable by the Web interface (i.e., has a corresponding Web
parameter). You can search for a specific parameter (e.g., "EnableIPSec") or a sub-string
of that parameter (e.g., "sec"). If you search for a sub-string, all parameters that contain the
searched sub-string in their names are listed.
¾ To search for ini file parameters configurable in the Web interface,
take these 4 steps:
1. On the Navigation bar, click the Search tab; the Search engine appears in the
Navigation pane.
2. In the 'Search' field, enter the parameter name or sub-string of the parameter name
that you want to search. If you have performed a previous search for such a
parameter, instead of entering the required string, you can use the 'Search History'
drop-down list to select the string (saved from a previous search).
3. Click Search; a list of located parameters based on your search appears in the
Navigation pane.
Each searched result displays the following:
• ini file parameter name
• Link (in green) to its location (page) in the Web interface
• Brief description of the parameter