Manualshelf

User`s manual

ManualsBrandsAudioCodes ManualsComputer equipmentMediant 600
371372373374375376377378379380
Version 5.4 377 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
Several entries with the same NPI-TON or Phone-Context are
allowed. In this scenario, a Tel-to-IP call uses the first match.
Phone-Context '+' is a unique as it doesn't appear in the Request-
URI as a Phone-Context parameter. Instead, it's added as a prefix to
the phone number. The '+' isn't removed from the phone number in
the IP-to-Tel direction.
To configure the Phone Context table using the Web interface, refer
to ''Mapping NPI/TON to Phone-Context'' on page 195.
For a description on using ini file table parameters, refer to ''Structure
of ini File Table Parameters'' on page 293.
4.4.14 Channel Parameters
The Channel Parameters define the DTMF, fax and modem transfer modes.
Table 4-14: Channel Parameters
ini File Parameter Description
DJBufMinDelay
For a description of this parameter, refer to ''Configuring the RTP /
RTCP Settings'' on page 88.
DJBufOptFactor
For a description of this parameter, refer to ''Configuring the RTP /
RTCP Settings'' on page 88.
AnalogSignalTransportTyp
e
For a description of this parameter, refer to "Configuring the RTP /
RTCP Settings" on page 88.
Note: This parameter is applicable only to Mediant 1000.
FaxTransportMode
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page 84.
FaxRelayEnhancedRedund
ancyDepth
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page 84.
FaxRelayRedundancyDept
h
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page 84.
FaxRelayMaxRate
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page 84.
FaxRelayECMEnable
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page 84.
FaxModemBypassCoderTy
pe
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page 84.
CNGDetectorMode
For a description of this parameter, refer to ''Configuring the Fax /
Modem / CID Settings'' on page 84.
FaxCNGMode
Determines the device's behavior upon detection of a CNG tone.
[0] = Does not send a SIP Re-INVITE upon detection of a fax CNG
tone when CNGDetectorMode is set to 1 (default).
[1] = Sends a SIP Re-INVITE upon detection of a fax CNG tone
when CNGDetectorMode is set to 1.