User`s manual

Version 5.4 373 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
 IsPresentationRestricted = Calling number presentation (0 to allow
presentation; 1 to restrict presentation).
For example:
[SourceNumberMapIp2Tel]
SourceNumberMapIp2Tel 0 =
22,03,$$,$$,$$,$$,2,667,$$,$$;SourceNumberMapIp2Tel 1 =
034,01,1.1.1.1,$$,0,2,$$,$$,972,$$,10;
[\SourceNumberMapIp2Tel]
Notes:
 RemoveFromLeft, RemoveFromRight, Prefix2Add, Suffix2Add,
LeaveFromRight, NumberType, and NumberPlan are applied if the
called and calling numbers match the DestinationPrefix,
SourcePrefix, and SourceAddress conditions.
 The manipulation rules are executed in the following order:
RemoveFromLeft, RemoveFromRight, LeaveFromRight, Prefix2Add,
and Suffix2Add.
 Parameters can be skipped by using two dollar signs ('$$').
 The Source IP address can include the 'x' wildcard to represent
single digits. For example: 10.8.8.xx represents all addresses
between 10.8.8.10 and 10.8.8.99.
 The Source IP address can include the asterisk ('*') wildcard to
represent any number between 0 and 255. For example, 10.8.8.*
represents all the addresses between 10.8.8.0 and 10.8.8.255.
 To configure manipulation of source numbers for IP-to-Tel calls using
the Web interface (i.e., in the 'Source Phone Number Manipulation
Table for IP-to-Tel Calls' table), refer to ''Configuring the Number
Manipulation Tables'' on page 190).
 For a description on using ini file table parameters, refer to ''Structure
of ini File Table Parameters'' on page 293.