Manualshelf

User`s manual

ManualsBrandsAudioCodes ManualsComputer equipmentMediant 600
351352353354355356357358359360
Version 5.4 359 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
The numbering of ports starts at 0.
If a port isn't configured, its Caller ID generation / detection are
determined according to the global parameter EnableCallerID
(described in ''Supplementary Services'' on page 176).
To configure Call ID Permissions using the Web interface, refer to
''Caller ID Permissions'' on page 224.
For an explanation on ini file table parameters, refer to ''Structure of ini
File Table Parameters'' on page 293.
EnableDIDWink
For a description of this parameter, refer to ''Advanced Parameters'' on
page 166.
DelayBeforeDIDWink
For a description of this parameter, refer to ''Advanced Parameters'' on
page 166.
EnableReversalPolarity
For a description of this parameter, refer to ''Advanced Parameters'' on
page 166.
EnableCurrentDisconn
ect
For a description of this parameter, refer to ''Advanced Parameters'' on
page 166.
CutThrough
For a description of this parameter, refer to ''Advanced Parameters'' on
page 166.
FXSOOSBehavior
For a description of this parameter, refer to ''Advanced Parameters'' on
page 166.
NumberOfWaitingIndic
ations
For a description of this parameter, refer to ''Supplementary Services'' on
page 176.
TimeBetweenWaitingIn
dications
For a description of this parameter, refer to ''Supplementary Services'' on
page 176.
TimeBeforeWaitingIndi
cation
For a description of this parameter, refer to ''Supplementary Services'' on
page 176.
WaitingBeepDuration
For a description of this parameter, refer to ''Supplementary Services'' on
page 176.
EnableCallerID
For a description of this parameter, refer to ''Supplementary Services'' on
page 176.
CallerIDType
For a description of this parameter, refer to ''Supplementary Services'' on
page 176.
SubscriptionMode
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
EnableMWI
For a description of this parameter, refer to ''Supplementary Services'' on
page 176.
MWIAnalogLamp
For a description of this parameter, refer to ''Supplementary Services'' on
page 176.
MWIDisplay
For a description of this parameter, refer to ''Supplementary Services'' on
page 176.
EnableMWISubscriptio
n
For a description of this parameter, refer to ''Supplementary Services'' on
page 176.
MWIServerIP
For a description of this parameter, refer to ''Supplementary Services'' on
page 176.