User`s manual

SIP User's Manual 348 Document #: LTRT-83303
Mediant 1000 & Mediant 600
ini File Parameter Description
DigitMapping
For a description of this parameter, refer to ''DTMF & Dialing
Parameters'' on page 160.
TimeBetweenDigits
For a description of this parameter, refer to ''DTMF & Dialing
Parameters'' on page 160.
MaxDigits
For a description of this parameter, refer to ''DTMF & Dialing
Parameters'' on page 160.
TimeForDialTone
For a description of this parameter, refer to ''DTMF & Dialing
Parameters'' on page 160.
RegretTime
For a description of this parameter, refer to ''Advanced Parameters'' on
page 166.
4.4.11 ISDN and CAS Interworking-Related Parameters
Table 4-11: ISDN and CAS Interworking-Related Parameters
ini File Parameter Description
EnableTDMoverIP
For a description of this parameter, refer to "Configuring the Digital
Gateway Parameters" on page 235.
EnableISDNTunnelingTe
l2IP
For a description of this parameter, refer to ''Configuring the Digital
Gateway Parameters'' on page 235.
EnableISDNTunnelingIP
2Tel
For a description of this parameter, refer to ''Configuring the Digital
Gateway Parameters'' on page 235.
ISDNDuplicateQ931Buff
Mode
Controls the activation / deactivation of delivering raw Q.931 messages.
 [0] = ISDN messages aren't duplicated (default).
 [128] = All ISDN messages are duplicated.
Note: This parameter is not updated on-the-fly and requires a device
reset.
EnableQSIGTunneling
For a description of this parameter, refer to ''Configuring the Digital
Gateway Parameters'' on page 235.
PlayRBTone2Trunk_ID
For a description of this parameter, refer to ''Configuring the Trunk
Settings'' on page 96.
DigitalOOSBehaviorFor
Trunk_ID
For a description of this parameter, refer to ''Configuring the Trunk
Settings'' on page 96.
DigitalOOSBehavior
For a description of this parameter, refer to ''Configuring the Digital
Gateway Parameters'' on page 235.
RemoveCallingName
For a description of this parameter, refer to ''Configuring the Digital
Gateway Parameters'' on page 235.
DefaultCauseMapISDN2I
P
For a description of this parameter, refer to ''Configuring the Digital
Gateway Parameters'' on page 235.