User`s manual

Version 5.4 343 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
BipOnConference
For a description of this parameter, refer to "Configuring the IPmedia
Parameters" on page 242.
TranscodingID
For a description of this parameter, refer to "Configuring the IPmedia
Parameters" on page 242.
ActiveSpeakersNotifica
tionMinInterval
For a description of this parameter, refer to Configuring the IPmedia
Settings on page 92.
EnableAGC
For a description of this parameter, refer to ''Configuring the IPmedia
Settings'' on page 92.
AGCGainSlope
For a description of this parameter, refer to ''Configuring the IPmedia
Settings'' on page 92.
AGCRedirection
For a description of this parameter, refer to ''Configuring the IPmedia
Settings'' on page 92.
AGCTargetEnergy
For a description of this parameter, refer to ''Configuring the IPmedia
Settings'' on page 92.
EnableConferenceDTM
FClamp
For a description of this parameter, refer to "Configuring the IPmedia
Parameters" on page 242.
EnableConferenceDTM
FReporting
For a description of this parameter, refer to "Configuring the IPmedia
Parameters" on page 242.
4.4.9 Voice Mail Parameters
For detailed information on the Voice Mail application, refer to the CPE Configuration
Guide for Voice Mail.
Table 4-9: Voice Mail Parameters
ini File Parameter Description
VoiceMailInterface
For a description of this parameter, refer to ''Configuring the Voice Mail
(VM) Parameters'' on page 244.
LineTransferMode
For a description of this parameter, refer to ''Configuring the Voice Mail
(VM) Parameters'' on page 244.
WaitForDialTime
For a description of this parameter, refer to ''Configuring the Voice Mail
(VM) Parameters'' on page 244.
MWIOnCode
For a description of this parameter, refer to ''Configuring the Voice Mail
(VM) Parameters'' on page 244.
MWIOffCode
For a description of this parameter, refer to ''Configuring the Voice Mail
(VM) Parameters'' on page 244.
MWISuffixCode
For a description of this parameter, refer to ''Configuring the Voice Mail
(VM) Parameters'' on page 244.
Digit Patterns The following digit pattern parameters apply only to VM applications that use the
DTMF communication method. For the available pattern syntaxes, refer to the CPE Configuration
Guide for Voice Mail.
DigitPatternForwardOn
Busy
For a description of this parameter, refer to ''Configuring the Voice Mail
(VM) Parameters'' on page 244.