User`s manual

Version 5.4 341 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
 The 'Profile Name' assigned to a Profile index, must enable users to
identify it intuitively and easily.
 To configure the IP Profile table using the Web interface, refer to ''IP
Profile Settings'' on page 216.
 For a description of using ini file table parameters, refer to ''Structure
of ini File Table Parameters'' on page 293.
TelProfile
This ini file table parameter configures the Tel Profile Settings table. The
format of this parameter is as follows:
[TelProfile]
FORMAT TelProfile_Index = TelProfile_ProfileName,
TelProfile_TelPreference, TelProfile_CodersGroupID,
TelProfile_IsFaxUsed*, TelProfile_JitterBufMinDelay*,
TelProfile_JitterBufOptFactor*, TelProfile_IPDiffServ*,
TelProfile_SigIPDiffServ*, TelProfile_DtmfVolume,
TelProfile_InputGain, TelProfile_VoiceVolume,
TelProfile_EnableReversePolarity, TelProfile_EnableCurrentDisconnect,
TelProfile_EnableDigitDelivery, TelProfile_EnableEC,
TelProfile_MWIAnalog, TelProfile_MWIDisplay,
TelProfile_FlashHookPeriod, TelProfile_EnableEarlyMedia*,
TelProfile_ProgressIndicator2IP*, TelProfile_TimeForReorderTone*;
[\TelProfile]
* = Indicates common parameters used in both IP and Tel profiles.
TelPreference = determines the priority of the Profile (1 to 20, where 20
is the highest preference). If both IP and Tel profiles apply to the same
call, the coders and other common parameters (indicated with an
asterisk) of the preferred Profile are applied to that call. If the preference
of the Tel and IP profiles is identical, the Tel Profile parameters are
applied.
For example:
[TelProfile]
TelProfile 1 = FaxProfile,1,1,1,40,13,22,33,$$,$$,$$,0,0,0,1,0,0,$$,0,$$;
TelProfile 2 = ModemProfile,2,2,0,40,13,$$,$$,$$,$$,$$,$$,$$,$$,0,0,
0,$$, 0,$$;
[\TelProfile]
Notes:
 This parameter can appear up to 9 times (i.e., indices 1-9).
 Two adjacent dollar signs ('$$') indicates that the parameter's default
value is used.
 The TelProfile index can be used in the Trunk Group table
(TrunkGroup parameter).
 The 'Profile Name' assigned to a Profile index must enable users to
identify it intuitively and easily.
 To configure the Tel Profile table using the Web interface, refer to
''Tel Profile Settings'' on page 214.
 For a description of using ini file table parameters, refer to ''Structure
of ini File Table Parameters'' on page 293.