User`s manual

Version 5.4 339 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
SASDefaultGatewayIP
For a description of this parameter, refer to "Stand-Alone Survivability"
on page 188.
Note: SAS is applicable only to Mediant 1000.
SASRegistrationTime
For a description of this parameter, refer to "Stand-Alone Survivability"
on page 188.
Note: SAS is applicable only to Mediant 1000.
SASShortNumberLength
For a description of this parameter, refer to "Stand-Alone Survivability"
on page 188.
Note: SAS is applicable only to Mediant 1000.
SASLocalSIPTCPPort
For a description of this parameter, refer to "Stand-Alone Survivability"
on page 188.
Note: SAS is applicable only to Mediant 1000.
SASLocalSIPTLSPort
For a description of this parameter, refer to "Stand-Alone Survivability"
on page 188.
Note: SAS is applicable only to Mediant 1000.
Profile Parameters
CoderName
This ini file table parameter defines the device's coder list. This includes
up to five groups of coders (consisting of up to five coders per group)
that can be associated with IP or Tel profiles ('Coder Group Settings'
page in the Web interface -- refer to ''Coder Group Settings'' on page
212). The first group of coders (indices 0 through 4) is the default coder
list and default coder group. The format of this parameter is as follows:
[CoderName]
FORMAT CoderName_Index = CoderName_Type,
CoderName_PacketInterval, CoderName_rate,
CoderName_PayloadType, CoderName_Sce;
[\CoderName]
Where,
 Type = Coder name
 PacketInterval = Packetization time
 Rate = Packetization rate
 PayloadType = Payload type
 Sce = Silence suppression mode
For example:
[CoderName]
CoderName 0 = g711Alaw64k, 20,,,0;
CoderName 1 = g726, $$, 3, 38, 0;
CoderName 2 = g729, 40, 255, 255, 1;
[\CoderName]
Notes:
 This parameter can include up to 25 indices (i.e., five coders per five
coder groups).
 The coder name is case-sensitive.
 If silence suppression is not defined for a specific coder, the value
defined by the parameter EnableSilenceCompression is used.
 The value of several fields is hard-coded according to common