User`s manual

Version 5.4 335 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
WarningToneDuration
Defines the duration (in seconds) for which Off-Hook Warning Tone is
played to the user.
The valid range is -1 to 2,147,483,647. The default is 600.
Notes:
 This parameter is applicable only to Mediant 1000.
 A negative value indicates that the tone is played infinitely.
FirstCallWaitingToneID
Determines the index of the first Call Waiting Tone in the CPT file. This
feature enables the called party to distinguish between four different call
origins (e.g., external vs. internal calls).
The device plays the tone received in the 'play tone CallWaitingTone#'
parameter of an INFO message + the value of this parameter - 1.
The valid range is -1 to 100. The default value is -1 (not used).
Notes:
 This parameter is applicable only to Mediant 1000.
 It is assumed that all Call Waiting Tones are defined in sequence in
the CPT file.
 This feature is relevant only to Broadsoft's application servers (the
tone is played using INFO message).
RTPOnlyModeForTrunk_I
D
For a description of this parameter, refer to "Configuring the Trunk
Settings" on page 96.
RTPOnlyMode
For a description of this parameter, refer to ''Advanced Parameters'' on
page 166.
TimeoutBetween100And1
8x
Defines the timeout (in msec) between receiving a 100 Trying response
and a subsequent 18x response. If a 18x response is not received
before this timer expires, the call is disconnected.
The valid range is 0 to 32,000. The default value is 0 (i.e., no timeout).
TransparentCoderPresent
ation
Determines the format of the Transparent coder representation in the
SDP.
 [0] = clearmode (default)
 [1] = X-CCD
RxDTMFOption
For a description of this parameter, refer to ''DTMF & Dialing
Parameters'' on page 160.