User`s manual
SIP User's Manual 332 Document #: LTRT-83303
Mediant 1000 & Mediant 600
ini File Parameter Description
DefaultReleaseCause
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
IPAlertTimeout
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
SIPPSessionExpires
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
SessionExpiresMethod
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
MINSE
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
SIPMaxRtx
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
SipT1Rtx
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
SipT2Rtx
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
EnableEarlyMedia
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
IgnoreAlertAfterEarlyMedi
a
Determines the device's interworking of ALERT messages from PRI to
SIP.
[0] = Disabled (default).
[1] = Enabled.
When enabled, if the device already sent a 183 response with an SDP
included and an ALERT message is received from the Tel side (with or
without Progress Indicator), the device does not send an additional 18x
response and the voice channel remains open.
When disabled, the device sends additional 18x responses as a result o
f
receiving an ALERT message whether or not a 18x response was
already sent.
EnableTransfer
For a description of this parameter, refer to ''Supplementary Services''
on page 176.
XferPrefix
For a description of this parameter, refer to ''Supplementary Services''
on page 176.
EnableHold
For a description of this parameter, refer to ''Supplementary Services''
on page 176.
HoldFormat
For a description of this parameter, refer to ''Supplementary Services''
on page 176.
EnableForward
For a description of this parameter, refer to ''Supplementary Services''
on page 176.
CallWaitingPerPort
This ini file table parameter defines call waiting per port. The format of
this parameter is as follows:
[CallWaitingPerPort]
FORMAT CallWaitingPerPort_Index = CallWaitingPerPort_IsEnabled;
CallWaitingPerPort_Port, CallWaitingPerPort_Module;
[\CallWaitingPerPort]