User`s manual

Version 5.4 327 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
RegistrarIP
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
RegistrarTransportType
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
RegistrarName
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
GWRegistrationName
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
AuthenticationMode
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
OOSOnRegistrationFail
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
RegistrationTime
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
RegistrationTimeDivider
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
RegistrationRetryTime
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
RegisterOnInviteFailure
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
RegistrationTimeThreshol
d
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 146.
ZeroSDPHandling
Determines the device's response to an incoming SDP with an IP
address of 0.0.0.0 in the Connection line.
 [0] Sets the IP address of the outgoing SDP Connection line to
0.0.0.0 (default).
 [1] Sets the IP address of the outgoing SDP Connection line to the
device's own IP address and adds a 'a=sendonly' line to the SDP.
ForkingHandlingMode
Determines how the device reacts to forking of outgoing INVITE
messages by the Proxy.
 [0] = Sequential. The device opens a voice stream toward the first
18x SIP response that includes an SDP, and disregards any 18x
response with an SDP received thereafter (default).
 [1] = Parallel. The device opens a voice stream toward the first 18x
SIP response that includes an SDP, and re-opens the stream toward
any subsequent 18x responses with an SDP.
Note: Regardless of the ForkingHandlingMode value, once a 200 OK
response is received, the device uses the RTP information and re-opens
the voice stream, if necessary.
Account
This ini file table parameter configures the Account table for registering
and/or authenticating (digest) a Trunk Group (e.g., IP-PBX) to a Serving
IP Group (e.g., Internet Telephony Service Provider - ITSP). The format
of this parameter is as follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password, Account_HostName,