User`s manual

Version 5.4 325 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
Notes:
 This table parameter can include up to 6 indices (0-5).
 For configuring the Proxy Sets, refer to the ini file parameter ProxyIP.
 For configuring the Proxy Set ID table using the Web interface, refer
to ''Proxy Sets Table'' on page 153.
 For an explanation on using ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 293.
UseSIPTgrp
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
EnableGRUU
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
UserAgentDisplayInfo
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
SIPSDPSessionOwner
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
RetryAfterTime
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
EnablePAssociatedURIHe
ader
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
EnableContactRestriction
For a description of this parameter, refer to ''SIP General Parameters''
on page 134.
ReRegisterOnConnection
Failure
Enables the device to perform SIP Re-Registration upon TCP/TLS
connection failure.
 [0] Disable (default).
 [1] Enable.
SourceNumberPreference
Determines the SIP header used to determine the Source Number in
incoming INVITE messages.
 “” (empty string) = Use device's internal logic for header preference
(default).
 “FROM” = Use the Source Number received in the From header.
The valid range is a string of up to 10 characters. The default is an
empty string.
EnableRTCPAttribute
Enables or disables the use of the 'rtcp' attribute in the outgoing SDP.
 [0] = Disable
 [1] = Enable (default)