User`s manual

SIP User's Manual 322 Document #: LTRT-83303
Mediant 1000 & Mediant 600
ini File Parameter Description
SNMP Trap Parameters
SNMPManagerTableIP_x
For a description of this parameter, refer to ''Configuring the SNMP
Managers Table'' on page 257.
SNMPManagerTrapPort_x
For a description of this parameter, refer to ''Configuring the SNMP
Managers Table'' on page 257.
SNMPManagerTrapUser_
x
This parameter can be set to the name of any configured SNMPV3 user
to associate with this trap destination. This determines the trap format,
authentication level, and encryption level. By default, the trap is
associated with the SNMP trap community string.
SNMPManagerIsUsed_x
For a description of this parameter, refer to ''Configuring the SNMP
Managers Table'' on page 257.
SNMPManagerTrapSendi
ngEnable_x
For a description of this parameter, refer to ''Configuring the SNMP
Managers Table'' on page 257.
SNMPTrapManagerHostN
ame
For a description of this parameter, refer to ''Configuring the Management
Settings'' on page 254.
SNMP Community String Parameters
SNMPReadOnlyCommuni
tyString_x
For a description of this parameter, refer to ''Configuring the SNMP
Community Strings'' on page 258.
SNMPReadWriteCommun
ityString_x
For a description of this parameter, refer to ''Configuring the SNMP
Community Strings'' on page 258.
SNMPTrapCommunityStri
ng
For a description of this parameter, refer to ''Configuring the SNMP
Community Strings'' on page 258.
SNMP v3 Users Parameters
SNMPUsers
This ini file table parameter configures SNMP v3 users. The format of this
parameter is as follows:
[SNMPUsers]
FORMAT SNMPUsers_Index = SNMPUsers_Username,
SNMPUsers_AuthProtocol, SNMPUsers_PrivProtocol,
SNMPUsers_AuthKey, SNMPUsers_PrivKey, SNMPUsers_Group;
[\SNMPUsers]
Where,
 Username = Name of the SNMP v3 user.
 AuthProtocol = Authentication protocol.
 PrivProtocol = Privacy protocol.
 AuthKey = Authentication key.
 PrivKey = Privacy key.
 Group = Group (read/write) with which the SNMP v3 user is
associated.
For example:
[SNMPUsers]
FORMAT SNMPUsers_Index = SNMPUsers_Username,
SNMPUsers_AuthProtocol, SNMPUsers_PrivProtocol,
SNMPUsers_AuthKey, SNMPUsers_PrivKey, SNMPUsers_Group;
SNMPUsers 1 = v3admin1, 1, 0, myauthkey, -, 1;
[\SNMPUsers]
The example above configures user 'v3admin1' with security level