User`s manual

SIP User's Manual 320 Document #: LTRT-83303
Mediant 1000 & Mediant 600
4.4.5 RADIUS Parameters
For detailed information on the supported RADIUS attributes, refer to ''Supported RADIUS
Attributes'' on page 419.
Table 4-5: RADIUS Parameters
ini File Parameter Description
EnableRADIUS
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 123.
AAAIndications
For a description of this parameter, refer to ''Configuring RADIUS
Accounting Parameters'' on page 247.
BehaviorUponRadiusTim
eout
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 123.
MaxRADIUSSessions
Number of concurrent calls that can communicate with the RADIUS
server (optional).
The valid range is 0 to 240. The default value is 240.
SharedSecret
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 123.
RADIUSRetransmission
Number of retransmission retries.
The valid range is 1 to 10. The default value is 3.
RadiusTO
Determines the time interval (measured in seconds) the device waits for
a response before a RADIUS retransmission is issued.
The valid range is 1 to 30. The default value is 10.
RADIUSAuthServerIP
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 123.
RADIUSAuthPort
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 123.
RADIUSAccServerIP
For a description of this parameter, refer to ''Configuring RADIUS
Accounting Parameters'' on page 247.
RADIUSAccPort
For a description of this parameter, refer to ''Configuring RADIUS
Accounting Parameters'' on page 247.
RadiusAccountingType
For a description of this parameter, refer to ''Configuring RADIUS
Accounting Parameters'' on page 247.
DefaultAccessLevel
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 123.
RadiusLocalCacheMode
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 123.
RadiusLocalCacheTimeo
ut
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 123.
RadiusVSAVendorID
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 123.
RadiusVSAAccessAttribu
te
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 123.