User`s manual

SIP User's Manual 32 Document #: LTRT-83303
Mediant 1000 & Mediant 600
3.3.3.1 Accessing Pages
The configuration pages are accessed by clicking the required page item in the Navigation
tree.
¾ To open a configuration page in the Work pane, take these 2 steps:
1. On the Navigation bar, click the required tab:
• Configuration (refer to ''Configuration Tab'' on page 64)
• Management (refer to ''Management Tab'' on page 253)
• Status & Diagnostics (refer to ''Status & Diagnostics Tab'' on page 278)
The menus of the selected tab appears in the Navigation tree.
2. In the Navigation tree, drill-down to the required page item; the page opens in the
Work pane.
You can also access previously opened pages, by clicking your Web browser's Back
button until you have reached the required page. This is useful if you want to view pages in
which you have performed configurations in the current Web session.
Notes:
• You can also access certain pages from the Device Actions button
located on the toolbar (refer to ''Toolbar'' on page 28).
• To view all the menus in the Navigation tree, ensure that the Navigation
tree is in 'Full' view (refer to ''Displaying Navigation Tree in Basic and Full
View'' on page 30).
• To get Online Help for the currently opened page, refer to ''Getting Help''
on page 52.
• Certain pages may not be accessible if your Web user account's access
level is low (refer to ''Configuring the Web User Accounts'' on page 112).
3.3.3.2 Viewing Parameters
For convenience, some pages allow you to view a reduced or expanded display of
parameters. A reduced display allows you to easily identify required parameters, enabling
you to quickly configure your device.
The Web interface provides you with two methods for handling the display of page
parameters:
 Display of "basic" and "advanced" parameters (refer to ''Displaying Basic and
Advanced Parameters'' on page 33)
 Display of parameter groups (refer to ''Showing / Hiding Parameter Groups'' on page
34)
Note: Certain pages may only be read-only if your Web user account's access level
is low (refer to ''Configuring the Web User Accounts'' on page 112). If a page
is read-only, 'Read-Only Mode' is displayed at the bottom of the page.