User`s manual

Version 5.4 313 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
ScenarioFileName
Defines the file name of the Scenario file to be loaded to the device. The
file name must have the dat extension and can be up to 47 characters.
For loading a Scenario using the Web interface, refer to ''Loading a
Scenario to the Device'' on page 46.
Telnet Parameters
TelnetServerEnable
For a description of this parameter, refer to ''Configuring the Application
Settings'' on page 71.
TelnetServerPort
For a description of this parameter, refer to ''Configuring the Application
Settings'' on page 71.
TelnetServerIdleDisconne
ct
For a description of this parameter, refer to ''Configuring the Application
Settings'' on page 71.
SSHServerEnable
For a description of this parameter, refer to ''Configuring the Application
Settings'' on page 71.
SSHServerPort
For a description of this parameter, refer to ''Configuring the Application
Settings'' on page 71.
Customizing the Web Appearance Parameters
For detailed information on customizing the Web interface interface, refer to ''Customizing the Web
Interface'' on page 48.
UseProductName
Determines whether the UserProductName text string is displayed
instead of the default product name.
 [0] = Disabled (default).
 [1] = Enables the display of the user-defined UserProductName text
string (in the Web interface interface and in the extracted ini file).
If enabled, the UserProductName text string is displayed instead of the
default product name.
UserProductName
Text string that replaces the default product name that appears in the
Web interface (upper right-hand corner) and the extracted ini file.
The default is 'Mediant 1000/Mediant 600'.
The string can be up to 29 characters.
UseWebLogo
 [0] = Logo image is used (default).
 [1] = Text string is used instead of a logo image.
If enabled, AudioCodes' default logo (or any other logo defined by the
LogoFileName parameter) is replaced with a text string defined by the
WebLogoText parameter.
WebLogoText
Text string that replaces the logo image. The string can be up to 15
characters.
LogoWidth
Width (in pixels) of the logo image.
Note: The optimal setting depends on the resolution settings.
The default value is 441, which is the width of AudioCodes' displayed
logo.
LogoFileName
Name of the image file (of type GIF, JPEG, or JPG) containing the user's
logo.
File name can be up to 47 characters.
The logo file name can be used to replace AudioCodes' default Web logo
with a user defined logo.