User`s manual

SIP User's Manual 306 Document #: LTRT-83303
Mediant 1000 & Mediant 600
ini File Parameter Description
ActivityListToLog
The Activity Log mechanism enables the device to send log messages
(to a Syslog server) that report certain types of Web actions according to
a pre-defined filter.
The following filters are available:
 [PVC] (Parameters Value Change) = Changes made on-the-fly to
parameters.
 [AFL] (Auxiliary Files Loading) = Loading of auxiliary files (e.g., via
'Certificate' screen).
 [DR] (Device Reset) = Reset of device via the 'Maintenance Actions'
screen.
 [FB] (Flash Memory Burning) = Burning of files / parameters to flash
(in 'Maintenance Actions' screen).
 [SWU] (Device Software Update) = cmp loading via the Software
Upgrade Wizard.
 [ARD] (Access to Restricted Domains) = Access to Restricted
Domains.
The following screens are restricted:
(1) ini parameters (AdminPage)
(2) 'General Security Settings'
(3) 'Configuration File'
(4) 'IPSec/IKE' tables
(5) 'Software Upgrade Key'
(6) 'Internal Firewall'
(7) 'Web Access List'
(8) 'Web User Accounts'
 [NAA] (Non Authorized Access) = Attempt to access the Web
interface with a false / empty user name or password.
 [SPC] (Sensitive Parameters Value Change) = Changes made to
sensitive parameters:
(1) IP Address
(2) Subnet Mask
(3) Default Gateway IP Address
(4) ActivityListToLog
For example: ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu', 'ard', 'naa',
'spc'
ECHybridLoss
Sets the four wire to two wire worst-case Hybrid loss, the ratio between
the signal level sent to the hybrid and the echo level returning from the
hybrid.
 [0] = 6 dB (default)
 [1] = N/A
 [2] = 0 dB
 [3] = 3 dB
GwDebugLevel
For a description of this parameter, refer to ''Advanced Parameters'' on
page 166.
CDRReportLevel
For a description of this parameter, refer to ''Advanced Parameters'' on
page 166.
CDRSyslogServerIP
For a description of this parameter, refer to ''Advanced Parameters'' on
page 166.