User`s manual

Version 5.4 303 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
LocalControlSubnetMask
For a description of this parameter, refer to ''Configuring the IP Settings''
on page 64.
LocalControlDefaultGW
For a description of this parameter, refer to ''Configuring the IP Settings''
on page 64.
LocalOAMIPAddress
For a description of this parameter, refer to ''Configuring the IP Settings''
on page 64.
LocalOAMSubnetMask
For a description of this parameter, refer to ''Configuring the IP Settings''
on page 64.
LocalOAMDefaultGW
For a description of this parameter, refer to ''Configuring the IP Settings''
on page 64.
Multiple Interface Table
InterfaceTable
This ini file table parameter configures the Multiple Interface table for
configuring logical IP addresses. The format of this parameter is as
follows:
[InterfaceTable]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_IPv6InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName;
InterfaceTable 0 = 6, 0, 192.168.85.14, 16, 192.168.0.1, 1, myAll;
[\InterfaceTable]
For example:
[InterfaceTable]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_IPv6InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName;
InterfaceTable 0 = 0, 0, 192.168.85.14, 16, 0.0.0.0, 1, ManagementIF;
InterfaceTable 1 = 2, 0, 200.200.85.14, 24, 0.0.0.0, 200, myControlIF;
InterfaceTable 2 = 1, 0, 211.211.85.14, 24, 211.211.85.1, 211,
myMediaIF;
[\InterfaceTable]
The above example, configures three network interfaces (OAMP,
Control, and Media applications).
Notes:
 To configure the Multiple Interface table using the Web interface, refer
to ''Configuring the Multiple Interface Table'' on page 68.
 For a description of configuring ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 293.
Differential Services.
For detailed information on IP QoS via Differentiated Services, refer to ''IP QoS via Differentiated
Services (DiffServ)'' on page 450.
NetworkServiceClassDiff
Serv
For a description of this parameter, refer to ''Configuring the QoS
Settings'' on page 78.
PremiumServiceClassMe
diaDiffServ
For a description of this parameter, refer to ''Configuring the QoS
Settings'' on page 78.
PremiumServiceClassCo
ntrolDiffServ
For a description of this parameter, refer to ''Configuring the QoS
Settings'' on page 78.