User`s manual

Version 5.4 301 May 2008
SIP User's Manual 4. ini File Configuration
ini File Parameter Description
SyslogOutputMethod
Determines the method used for Syslog messages.
 [0] = Send all Syslog messages to the defined Syslog server (default).
 [1] = Send all Syslog messages using the Debug Recording
mechanism.
 [2] = Send only Error and Warning level Syslog messages using the
Debug Recording mechanism.
For a detailed description on Debug Recording, refer to Debug
Recording (DR).
BaseUDPport
For a description of this parameter, refer to ''Configuring the RTP / RTCP
Settings'' on page 88.
RemoteBaseUDPPort
For a description of this parameter, refer to "Configuring the RTP / RTCP
Settings" on page 88.
L1L1ComplexTxUDPPort
For a description of this parameter, refer to "Configuring the RTP / RTCP
Settings" on page 88.
L1L1ComplexRxUDPPort
For a description of this parameter, refer to "Configuring the RTP / RTCP
Settings" on page 88.
NTPServerIP
For a description of this parameter, refer to ''Configuring the Application
Settings'' on page 71.
NTPServerUTCOffset
For a description of this parameter, refer to ''Configuring the Application
Settings'' on page 71.
NTPUpdateInterval
For a description of this parameter, refer to ''Configuring the Application
Settings'' on page 71.
IP Routing Table parameters:
The IP routing ini file parameters are array parameters. Each parameter configures a specific column
in the IP routing table. The first entry in each parameter refers to the first row in the IP routing table,
the second entry to the second row and so forth.
In the following example, two rows are configured when the device is in network 10.31.x.x:
RoutingTableDestinationsColumn = 130.33.4.6, 83.4.87.6
RoutingTableDestinationMasksColumn = 255.255.255.255, 255.255.255.0
RoutingTableGatewaysColumn = 10.31.0.1, 10.31.0.112
RoutingTableInterfacesColumn = 0, 1
RoutingTableHopsCountColumn = 20, 20
RoutingTableDestination
sColumn
For a description of this parameter, refer to ''Configuring the IP Routing
Table'' on page 75.
RoutingTableDestination
MasksColumn
For a description of this parameter, refer to ''Configuring the IP Routing
Table'' on page 75.
RoutingTableGatewaysC
olumn
For a description of this parameter, refer to ''Configuring the IP Routing
Table'' on page 75.
RoutingTableHopsCount
Column
For a description of this parameter, refer to ''Configuring the IP Routing
Table'' on page 75.
RoutingTableInterfacesC
olumn
For a description of this parameter, refer to ''Configuring the IP Routing
Table'' on page 75.
VLAN Parameters
VLANMode
For a description of this parameter, refer to ''Configuring the IP Settings''
on page 64.