User`s manual

SIP User's Manual 284 Document #: LTRT-83303
Mediant 1000 & Mediant 600
¾ To view the IP-to-Tel and Tel-to-IP Call Counters pages, take this
step:
 Open the Call Counters page that you want to view (Status & Diagnostics tab >
Gateway Statistics menu > IP to Tel Calls Count or Tel to IP Calls Count page
item); the figure below shows the 'IP to Tel Calls Count' page.
Figure 3-125: Calls Count Page
Table 3-66: Call Counters Description
Counter Description
Number of
Attempted Calls
Indicates the number of attempted calls. It is composed of established and
failed calls. The number of established calls is represented by the 'Number of
Established Calls' counter. The number of failed calls is represented by the
failed-call counters. Only one of the established / failed call counters is
incremented every time.
Number of
Established Calls
Indicates the number of established calls. It is incremented as a result of one of
the following release reasons if the duration of the call is greater than zero:
 GWAPP_REASON_NOT_RELEVANT (0)
 GWAPP_NORMAL_CALL_CLEAR (16)
 GWAPP_NORMAL_UNSPECIFIED (31)
And the internal reasons:
 RELEASE_BECAUSE_UNKNOWN_REASON
 RELEASE_BECAUSE_REMOTE_CANCEL_CALL
 RELEASE_BECAUSE_MANUAL_DISC
 RELEASE_BECAUSE_SILENCE_DISC
 RELEASE_BECAUSE_DISCONNECT_CODE
Note: When the duration of the call is zero, the release reason
GWAPP_NORMAL_CALL_CLEAR increments the 'Number of Failed Calls due
to No Answer' counter. The rest of the release reasons increment the 'Number
of Failed Calls due to Other Failures' counter.
Percentage of
Successful Calls
(ASR)
The percentage of established calls from attempted calls.
Number of Calls
Terminated due to a
Busy Line
Indicates the number of calls that failed as a result of a busy line. It is
incremented as a result of the following release reason: GWAPP_USER_BUSY
(17)