User`s manual

SIP User's Manual 280 Document #: LTRT-83303
Mediant 1000 & Mediant 600
3.6.1.2 Viewing the Ethernet Port Information
The 'Ethernet Port Information' page displays read-only information on the Ethernet
connection used by the device. This includes indicating the active port, duplex mode, and
speed. You can also access this page from the 'Home' page (refer to ''Using the Home
Page'' on page 52).
For detailed information on the Ethernet redundancy scheme, refer to ''Ethernet Interface
Redundancy'' on page 445. For detailed information on the Ethernet interface
configuration, refer to ''Ethernet Interface Configuration'' on page 445.
¾ To view Ethernet port information, take the following step:
 Open the ‘Ethernet Port Information’ page (Status & Diagnostics tab > Status &
Diagnostics menu > Ethernet Port Information page item).
Figure 3-121: Ethernet Port Information Page
Table 3-65: Ethernet Port Information Parameters
Parameter Description
Active Port Displays the active Ethernet port (1 or 2).
Duplex Mode Displays the Duplex mode of the Ethernet port (Half Duplex or Full Duplex).
Speed Displays the speed (in Mbps) of the Ethernet port (10 Mbps; 100 Mbps).
3.6.1.3 Viewing Device Information
The 'Device Information' page displays the device's specific hardware and software product
information. This information can help you to expedite troubleshooting. Capture the page
and e-mail it to AudioCodes Technical Support personnel to ensure quick diagnosis and
effective corrective action. This page also displays any loaded files used by the device
(stored in the RAM) and allows you to remove them.