User`s manual

SIP User's Manual 276 Document #: LTRT-83303
Mediant 1000 & Mediant 600
9. In the 'FINISH' page, complete the upgrade process by clicking Reset; the device
'burns' the newly loaded files to flash memory and then resets t.he device. After the
device resets, the 'End Process' screen appears displaying the burned configuration
files (refer to the figure below).
Figure 3-117: End Process Wizard Page
10. Click End Process to close the wizard, and then in the 'Enter Network Password'
dialog box, enter your login user name and password (described in ''Accessing the
Web Interface'' on page 26) and click OK; a message box appears informing you of
the new CMP file:
Figure 3-118: Message Box Informing of Upgraded CMP File
11. Click OK; the Web interface now becomes active and reflecting the upgraded device.
3.5.2.4 Backing Up and Restoring Configuration
The 'Configuration File' page allows you to save a copy of the device's current
configuration file modifications as an ini file to a PC. This is useful for backing up your
configuration to protect your device configuration. The saved ini file includes only those
parameters that were modified as well as parameters with other than default values.
In addition, this page allows you to load an ini file to the device. If the device has lost its
configuration, you can restore the device's configuration by loading the previously saved ini
file, or by simply loading a newly created ini file.