User`s manual

Version 5.4 273 May 2008
SIP User's Manual 3. Web-Based Management
¾ To use the Software Upgrade Wizard, take these 11 steps:
1. Stop all traffic on the device (refer to the note above).
2. Open the 'Software Upgrade Wizard' (Management tab > Software Update menu >
Software Upgrade Wizard); the 'Software Upgrade Wizard' page appears.
Figure 3-113: Start Software Upgrade Wizard Screen
3. Click the Start Software Upgrade button; the 'Load a CMP file' Wizard page appears.
Figure 3-114: Load a CMP File Wizard Page
Note: At this stage, you can quit the Software Update Wizard, by clicking Cancel
, without requiring a device reset. However, once you start uploading a
cmp file, the process must be completed with a device reset.